PL-3 Post Puller and Accessories
The hand portable PL-3 weighs only 53 lbs (24 kg) and is easily operated by one man.

Step 1:   The puller is positioned with the post between its feet. The hydraulic cylinder is collapsed and the hook removed from its carrying position.
     
Step 2:   A post grabber or a chain is placed around the post and the puller's hook attached to the post grabber. Then the safety restraint is attached to the cable eye above the hook.
     
Step 3:   The hydraulic valve is closed and the operator activates the hydraulic pump producing over 3 tons of pressure to pull the post. In two minutes, a post 3 feet (0.9 m) is pulled. The safety restraint is removed after the post starts moving.
     
Step 4 :   After pulling the post, the PL-3 is returned to carrying configuration.


 
 

Model
and/or
Part No.

 Height Width &
Height

Hook Opening

 Cable Pulling Stroke Weight
1.
 PL-3
071000

36 3/4"
934mm

12" x 12-1/4"
305mm x 311mm

1"
25.4mm		 3/8"
9.5 mm		 39"
990 mm		 53 lbs
24 kg
               
2.
 071040
Post Grabber with an Opening of 4-3/8" Wide x 2-1/2" Deep (111 mm x 63.5 mm) for the Post to be Pulled and a 1-1/2" (38.1 mm) Hook Eye Opening, Weighing 11.38 lbs (5.16 kg).




How can you work faster with fewer employees? Give us a call at
1-866-786-1009 or 906-786-1008

Equipment | Pre-Shaped Ties | About Us | Contact Us

© 2011 L&C Enterprises-USA, Inc. All rights reserved.