Upper Report Form

Call Us Today! 1-866-786-1009

4 Barriers Threatening the Profitability and Survival of Fencing Companies






SIGN UP TO VIEW OUR FREE REPORT!

Your personal information is always kept private.


Fencing Equipment

Featured Video Play Icon

Auger Torque tears through asphalt, frozen ground

Today, we are working on a project in Iron Mountain, Mich. It’s pretty cold out today. I actually bid this job early last year which was supposed to go this past summer but because of a change in hierarchy it got over looked for a while. All of sudden the end of the year comes…

Read More
Featured Video Play Icon

How we use a Rhino fence post driver on a chain link job

The Rhino PD-50 is actually run by air. It will hammer or vibrate the post down. In this case, we are pounding it down four feet. It’s taking about 30 seconds to pound down into the soil. The hose runs from the Rhino PD-50 all the way to the oiler and then into the air…

Read More
Featured Video Play Icon

Gas-powered driver pounds fence post for residential chain link project

Today, we are working on a chain link fence for a backyard that is needed to hold a dog. We are going to be using a Rhino GPD-40 Fence Pro gas-powered post driver to help pound the post in. We already have some of the corners pounded in. It’s strung, and so, we can pound…

Read More
Featured Video Play Icon

Rhino MP-3 Post Puller pulls fence post from frozen ground

We pounded a couple of posts in a few days ago with the Rhino GPD-40 Fence Pro gas powered post driver. Today, we are going to pull them out with the Rhino MP-3 post puller. I will set the post puller in front of the 1 5/8 inch pipe and wrap the chain around the…

Read More
Featured Video Play Icon

Rhino GPD-40 is tough enough to drive fence post into frozen ground

Today, we are going to demonstrate the new Rhino GPD-40 Fence Pro Gas Powered Post Driver. The driver is becoming a vital piece of fence installation equipment. We are going to demonstrate it here in the snow. The fence pro has interchangeable adapters for different size posts. I’m going to pound a 2-inch pipe and…

Read More
Featured Video Play Icon

New Rhino GPD-40 gas powered post driver pounds larger fence post

On this project, we are putting up 4-foot black vinyl chain link. We have 2-inch post and 2 1/2-inch post to install. The 2 1/2-inch post are, of course, being used as our terminal posts. Because of the location of half of this fence that happens to go through a wooded area we decided we…

Read More
Featured Video Play Icon

Pop old posts right out with manual fence post puller

Today we are working on a chain link job where the owner called us to change out the four foot high chain link to five foot chain link. In regards to that, we had existing post that were set in concrete. We had to pull out four or five posts in one area. With the…

Read More
Featured Video Play Icon

For augering post holes in frozen ground, this works like crazy

Today, we are trying to find out how much frost is in the ground. We are going to be augering post holes to illustrate the purpose of using down pressure and the downriggers or rear stabilizers on the skid-steer. We monitored the pressure by using scales and a gravel and concrete company. We drove the…

Read More
Featured Video Play Icon

Maneuverability of a gas powered post driver

We put to the test the new Rhino GPD-30 Gas Powered Post Driver while on a residential fence project. It was small project to close off the backyard for a dog. It required driving 8 foot posts to 5 feet to close off a backyard for a dog. The gas powered Rhino post driver was…

Read More
Featured Video Play Icon

Rhino Post Puller MP-3 is a tough piece of fence equipment

Today, we had to remove a small little job that we put up about a year and a half ago. It was a temporary job. We took the fence down. We tried out the new Rhino Post Puller MP-3. We didn’t have to have a lot of equipment. The space was tight so we couldn’t…

Read More